Name: BSP76E6433HUMA1
Brand: Infineon Technologies
SKU: BSP76E6433HUMA1
Price: 1.68000 USD
Availability: InStock

new-10%

BSP76E6433HUMA1

Manufacturer part number:BSP76E6433HUMA1

Manufacturer:Infineon Technologies

Description:N-Channel 2.3mm PMIC HITFET? Series BSP76 4 Pin 12V TO-261-4, TO-261AA

Case Package:SOT-23

Datasheet:BSP76E6433HUMA1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	18 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-261-4, TO-261AA
Number of Pins	4
Manufacturer Package Identifier	PG-SOT223-4
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2003
Series	HITFET®
JESD-609 Code	e3
Feature	Auto Restart
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	4
ECCN Code	EAR99
Terminal Finish	Tin (Sn)
Max Power Dissipation	3.8W
Technology	MOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	12V
Terminal Pitch	2.3mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	BSP76
Pin Count	4
Number of Outputs	1
Output Voltage	42V
Output Type	N-Channel
Operating Supply Voltage	42V
Voltage	42V
Interface	On/Off
Current	14A
Output Configuration	Low Side
Power Dissipation	3.8W
Output Current	1.8A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Halogen Free	Not Halogen Free
Drain to Source Voltage (Vdss)	42V
Nominal Input Voltage	42V
Continuous Drain Current (ID)	1.4A
Ratio - Input:Output	1:1
Voltage - Load	42V Max
Max Dual Supply Voltage	42V
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Output Peak Current Limit-Nom	1.8A
Rds On (Typ)	150m Ω
Max Junction Temperature (Tj)	150°C
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Rds On Max	200 mΩ
On-State Resistance	200mOhm
Height	1.7mm
Length	6.5mm
Width	3.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BSP76E6433HUMA1 Product Details

BSP76E6433HUMA1 Overview

Tape & Reel (TR) is how it's packaged.It is included in the package TO-261-4, TO-261AA.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Auto Restart features is available.As you can see, it comes from the BSP76 family.A total of 4 terminations have been recorded.The 4 pins are used for the operation of the system.The LED driver has 1 functions.It is possible to obtain high efficiency with a supply voltage of 12V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.These electrical components are part of the HITFET? series.In this case, the output current will be set to 1.8A.When using this LED driving board, it is recommended that the supply voltage is set to 42V.