SSCSANN001BAAA3 Overview
As a convenience, this transducer is included in 4-SIP, Side Port. Temperature should be set at -40°C~85°C on transducers in order for them to work reliably. Obtaining a 3V~3.6V supply voltage is not a problem for the transducers. To ensure proper operation of the transducers, it is necessary to connect the 4 pins. A nominal supply current of 1.6mA can run the transducers normally. In order for the transducers to work, the voltage discharged by them should be 2.97V. If the transducer is designed to operate continuously at the rated ambient temperature, then the DC voltage should be 3.3V. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
SSCSANN001BAAA3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 4-SIP, Side Port
Operating Temperature: -40°C~85°C
4 Pins
TruStability® SSC series
Operating Pressure: 14.5PSI (100kPa)
Operating Supply Voltage: 3.3V
SSCSANN001BAAA3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
SSCSANN001BAAA3 Transducers applications.
- Hydrogen Storage
- Refrigerant pressure monitoring in HVAC/R systems
- Dry air system pressure, process controls and automation
- Dry air system monitoring
- Hydraulic, brake, and engine oil fluid pressure monitoring
- Air brake pressure monitoring
- Vertical velocity indication (e.g. rise/sink speed)
- Internet of things
- Enhancement of GPS navigation
- Indoor navigation & localization (floor detection, elevator detection)
