SDX05D4 Overview
As a convenience, this transducer is included in 6-DIP Module. Temperature should be set at -40°C~85°C on transducers in order for them to work reliably. Obtaining a 20V supply voltage is not a problem for the transducers. It is possible for the transducers to operate at a maximum temperature of 85°C. Temperatures below -40°C are unacceptable for the transducers. To ensure proper operation of the transducers, it is necessary to connect the 6 pins. In order for the transducers to work, the voltage discharged by them should be 60mV. If the transducer is designed to operate continuously at the rated ambient temperature, then the DC voltage should be 20V. You can apply a voltage of 20V without damaging the transducers.
SDX05D4 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 6-DIP Module
Operating Temperature: -40°C~85°C
6 Pins
SDX series
Operating Pressure: 5PSI (34.47kPa)
SDX05D4 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
SDX05D4 Transducers applications.
- Hydrogen Storage
- Refrigerant pressure monitoring in HVAC/R systems
- Dry air system pressure, process controls and automation
- Dry air system monitoring
- Hydraulic, brake, and engine oil fluid pressure monitoring
- Air brake pressure monitoring
- Vertical velocity indication (e.g. rise/sink speed)
- Internet of things
- Enhancement of GPS navigation
- Indoor navigation & localization (floor detection, elevator detection)
