HSCDANT001PGSA3 Overview
As a convenience, this transducer is included in 8-DIP (0.524, 13.30mm), Top Port. Temperature should be set at -20°C~85°C on transducers in order for them to work reliably. Obtaining a 3V~3.6V supply voltage is not a problem for the transducers. To ensure proper operation of the transducers, it is necessary to connect the 4 pins. There is a maximum pressure range of 1 Psi set by this transducer. A nominal supply current of 1.6mA can run the transducers normally. If the transducer is designed to operate continuously at the rated ambient temperature, then the DC voltage should be 3.3V.
HSCDANT001PGSA3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-DIP (0.524, 13.30mm), Top Port
Operating Temperature: -20°C~85°C
4 Pins
TruStability® HSC series
Operating Pressure: 1PSI (6.89kPa)
HSCDANT001PGSA3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
HSCDANT001PGSA3 Transducers applications.
- Hydrogen Storage
- Refrigerant pressure monitoring in HVAC/R systems
- Dry air system pressure, process controls and automation
- Dry air system monitoring
- Hydraulic, brake, and engine oil fluid pressure monitoring
- Air brake pressure monitoring
- Vertical velocity indication (e.g. rise/sink speed)
- Internet of things
- Enhancement of GPS navigation
- Indoor navigation & localization (floor detection, elevator detection)
