CSNF161 Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. In order to protect the devices from damage, these current sensors are packaged in the Bulk. These current sensors should supply no more than 10mA current. Current sensors should not supply more current than 10mA. In order for these current sensors to work, the temperature must not be lower than -40°C. Nevertheless, the maximum operating temperature for the current sensors should be set to 85°C. Current sensors have been designed for 150A current. This current sensor has 3 pins. During operation, the current sensors could supply 15V voltage. As a rule of thumb, current sensors should supply 10mA current. Current sensors should output 100mA current. It is important that the voltage supplied by these sensors is not lower than 12V in a DC circuit. In the DC circuit, however, the voltage supplied by the current sensors should not exceed 15V.
CSNF161 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Frequency: 150kHz
Sensing Current: 150A
Module, Single Pass Through Package
CSNF161 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSNF161 Current Sensors applications.
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
