CSNE151-005 Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. These current sensors are packaged in the Tube to protect the devices from damage. The current supplied by current sensors should not be higher than 10mA. The current sensors have 13 terminations. The current for which the current sensors have been designed is 36A. There are 6 pins in this current sensor. The current sensors could supply 15V voltage when they operate. These current sensors can supply a voltage of 15V while working. Nominally, the current supplied by current sensors should be 10mA. The current output from current sensors should be 25mA. In a DC circuit, the voltage supplied by these sensors should not be lower than 14.25V. But the voltage supplied by the current sensors should not exceed 15.75V in the DC circuit.
CSNE151-005 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Module, Single Pass Through Package
CSNE151-005 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSNE151-005 Current Sensors applications.
- Motor and load control
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
