CSNE151 Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. In order to protect these current sensors, the Bulk is used to protect them. It is recommended that these current sensors supply a maximum current of 10mA. The current supplied by current sensors should not exceed 10mA. Current sensors must work at a temperature above 0°C. However, the maximum operating temperature for the current sensors should be set to 70°C. Current sensors are designed for currents of 36A. On this current sensor, there are 13 pins. When they operate, current sensors can supply 15V voltage. As a rule of thumb, current sensors should supply 10mA current. As a result of the current sensors, the current output should be 25mA. Sensors in DC circuits should not supply voltages less than 14.25V. Nevertheless, the DC circuit voltage should not exceed 15.75V when the current sensors are being used.
CSNE151 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Sensing Current: 36A
Module, Single Pass Through Package
CSNE151 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNE151 Current Sensors applications.
- Static converters for DC motor drives
- Battery supplied applications
- DC motor drives
- Battery supplied applications
- Continuity
- Power supply management
- Uninterruptible Power Supplies(UPS)
- Home Automation
- Proving Switch
- Leakage Current Sensors
