CSNB131 Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. These current sensors are packaged in the Bulk to protect the devices from damage. The maximum current supplied by these current sensors should be 10mA. The current supplied by current sensors should not be higher than 10mA. The operating temperature must not be lower than 0°C to ensure these current sensors work. But the maximum operating temperature for the current sensors should be set to 70°C. The current for which the current sensors have been designed is 100A. There are 3 pins in this current sensor. The current sensors could supply 15V voltage when they operate. Nominally, the current supplied by current sensors should be 10mA.
CSNB131 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Sensing Current: 100A
Module, Single Pass Through Package
CSNB131 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSNB131 Current Sensors applications.
- Motor and load control
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
