CSLA2GE Overview
Safety precautions are taken by putting the current sensors in Module, Single Pass Through packages. The current sensors are enclosed in the Bulk to prevent them from being damaged. These current sensors should supply 20mA current at their maximum. Current sensors should supply no more current than 20mA. It is imperative that the operating temperature for these current sensors does not go below -25°C. For the current sensors, the maximum operating temperature should be set to 85°C. For current sensors, 92A is the current of interest. A current sensor like this has 3 pins. Normally, current sensors supply 20mA current. If these sensors are used in a DC circuit, the voltage they supply should not be less than 6V. In the DC circuit, the voltage provided by the current sensors should not exceed 12V.
CSLA2GE Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 92A
Module, Single Pass Through Package
CSLA2GE Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA2GE Current Sensors applications.
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
- AC variable speed drives
- Static converters for DC motor drives
- Battery supplied applications
