CSLA2EN Overview
A Module, Single Pass Through package is used to protect the current sensors from damage. The devices are protected from damage by the Bulk package. It is recommended that these current sensors supply a maximum current of 20mA. No more than 20mA current should be supplied by current sensors. To make these current sensors work, their operating temperature must not fall below -25°C. Current sensors should, however, be set to 85°C for their maximum operating temperature. A current sensor is designed for a current of 950A. Current sensors have 3 pins. The nominal current supplied by current sensors is 20mA.
CSLA2EN Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 950A
Module, Single Pass Through Package
CSLA2EN Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA2EN Current Sensors applications.
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
