CSLA2EL Overview
Current sensors are packaged in Module, Single Pass Through packages to ensure their safety. Current sensors are packaged in the Bulk for protection. Ideally, these current sensors should supply a maximum current of 20mA. Current sensors should not supply current higher than 20mA. It is imperative that these current sensors be operated at temperatures not below -25°C. As a result, the maximum operating temperature should be set to 85°C for the current sensors. It has been designed for 550A current to be sensed by the current sensors. As far as this current sensor is concerned, there are only 3 pins. Accordingly, the current provided by current sensors should have a nominal value of 20mA. This sensors should supply a voltage not less than 6V in a DC circuit. In the DC circuit, the voltage supplied by the current sensors should however not exceed 12V.
CSLA2EL Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 550A
Module, Single Pass Through Package
CSLA2EL Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA2EL Current Sensors applications.
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
- AC variable speed drives
- Static converters for DC motor drives
- Battery supplied applications
- Uninterruptible Power Supplies(UPS)
- Switched Mode Power Supplies(SMPS)
- Power supplies for welding applications
- AC variabel speed drives and servo motor drives
