CSLA2DH Overview
A Module, Single Pass Through package is used for the protection of the current sensors. A Bulk is used to protect the current sensors against damage. Current sensors should not provide more current than 20mA. There is no current for which the current sensors have been designed. This current sensor contains 3 pins. A current sensor should normally provide a current of 20mA. The voltage supplied by these sensors should not be less than 6V in a DC circuit. In the DC circuit, the current sensors should not provide a voltage greater than 12V.
CSLA2DH Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Module, Single Pass Through Package
CSLA2DH Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA2DH Current Sensors applications.
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
- AC variable speed drives
- Static converters for DC motor drives
