CSLA1GF Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. These current sensors are packaged in the Bulk to protect the devices from damage. The maximum current supplied by these current sensors should be 19mA. The current supplied by current sensors should not be higher than 19mA. The operating temperature must not be lower than -25°C to ensure these current sensors work. But the maximum operating temperature for the current sensors should be set to 85°C. The current for which the current sensors have been designed is 100A. There are 3 pins in this current sensor.
CSLA1GF Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 100A
Module, Single Pass Through Package
CSLA1GF Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA1GF Current Sensors applications.
- Motor and load control
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
