CSDA1DC Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. For protection, these sensors are packaged in the Bulk. Current sensors should only output 12mA current. A current sensor's supply current should not exceed 12mA. If these current sensors are to function, their operating temperatures cannot be lower than -25°C. The current sensors should remain at 85°C for the maximum operating temperature. A 12mA current sensor has been designed for a 12mA current. When operating, the sensors could supply 16V. Sensors that supply current should supply 6.5A current nominally. In the case of current sensors, the voltage output should be 400mV. The voltage supplied by these sensors cannot fall below 6V in a DC circuit. It is important, however, that the voltage supplied by the current sensors does not exceed 16V in the DC circuit.
CSDA1DC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Chassis Mount
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 7.5A
Module, Single Pass Through Package
CSDA1DC Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSDA1DC Current Sensors applications.
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
- AC variable speed drives
- Static converters for DC motor drives
- Battery supplied applications
- Uninterruptible Power Supplies(UPS)
- Switched Mode Power Supplies(SMPS)
- Power supplies for welding applications
