PD333-3C/H0/L2 Overview
The photodiodes are packaged in the Bulk for protection. It is necessary to place the photodiodes into Radial packages in order to protect them from damage. A continuous reverse-bias voltage of 170V should be maintained for the photodiodes. There are 2 pins on the photodiodes. A circuit made up of photodiodes could release heat 150mW. Anode voltage for the reverse anode of the photodiodes should be 32V. Photodiodes generally release 150mW heat when connected in a circuit. DC photodiodes can work properly under reverse voltages of 32V in the DC circuit. Despite the absence of light, photodiodes make 5nA current.
PD333-3C/H0/L2 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -25°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 400nm ~ 1100nm
Viewing Angle: 80°
PD333-3C/H0/L2 Applications
There are a lot of Everlight Electronics Co Ltd PD333-3C/H0/L2 Photodiodes applications.
- High speed photo detector
- Light Bariers
- Solar Cells
- Vision Controls
- Low Capacitance
- Pure UV-C Monitoring
- Pulse Oximetry
- Diode Laser Monitoring
- Electronic Equipment
- Measurement Levelling
