ZDS1009TA Overview
Buck boost converter is part of the package Tape & Reel (TR).In the way voltage regulator is packaged, voltage regulator is in the form of a 8-SMD, Gull Wing.Surface Mount is used to mount this current regulator on the board.There should be no temperature above -55°C~150°C at the time of operation.An input voltage wcurrent regulatorh a value of 120V Max may be used as an input voltage.A 8 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 8 termination.There are two types of ZDS1009s in this family.When a computer or other communication constant current regulator has 8 pins, these are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.As long as the constant current is powered by a 5VV power source, it should work as long as it is plugged in.The analog IC used in this power converter is ANALOG CIRCUIT.The maximum supply voltage of 1.75V is supported by it.In order to operate, it must be powered by a minimum voltage of -1.45V.
ZDS1009TA Features
Tape & Reel (TR) package
ZDS1009 family
The maximal supply voltage of 1.75V
ZDS1009TA Applications
There are a lot of Diodes Incorporated ZDS1009TA Current Regulation/Managements applications.
- DC-to-dc converters
- Transmission controls
- Engine management
- Industrial applications current measurement
- Power management
- Diesel injection controls
- Power supply current measurement
- Level translating
- Over-current protection
- Vehicle dynamic controls
