TLV271CW5-7 Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. There are 5 pins on this chip. Op amp ic rates 500μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 550μA volt supply current is needed for this linear amplifier to operate. 110dB should remain the voltage gain. There are 1 circuits on this op amp. Instrumentation amplifier has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. It should not lower than 0°C to operate buffer amplifier. You should not use op amp above 70°C degrees. There are 1 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For optimal performance, this electrical part should be connected to a supply with a current of 550μA. Under 16V is the minimum supply voltage for this electric component. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.7V when using it. In order to conduct this part, you will need to provide dual supply voltages of 8V volts.
TLV271CW5-7 Features
110dB voltage gain
Output Type: Rail-to-Rail
TLV271CW5-7 Applications
There are a lot of Diodes Incorporated TLV271CW5-7 Instrumentational OP Amps applications.
- Comparator
- Vehicle electronics
- pH (acidity)
- Blood pressure sensors
- Car stereo
- Proportional operation circuits
- Semiconductor detectors
- Computer workstations
- Cinema or auditorium audio system
- Digital cameras
