Name: DML3006LFDS-7
Brand: Diodes Incorporated
SKU: DML3006LFDS-7
Price: 1.61000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	19 Weeks
Mounting Type	Surface Mount
Package / Case	8-VFDFN Exposed Pad
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
JESD-30 Code	S-PDSO-N8
Number of Outputs	1
Output Type	N-Channel
Supply Voltage-Max (Vsup)	5.5V
Supply Voltage-Min (Vsup)	3V
Interface	On/Off
Current - Output (Max)	10.5A
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	3V~5.5V
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	0.5V~13.5V
Fault Protection	Short-Circuit, Thermal Shutdown, UVLO
Rds On (Typ)	8m Ω
Supply Voltage1-Nom	1.8V
Built-in Protections	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction	SINK
Supply Voltage1-Min	0.5V
Height Seated (Max)	0.85mm
Length	2mm
Width	2mm
RoHS Status	ROHS3 Compliant

DML3006LFDS-7 Product Details

DML3006LFDS-7 Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 8-VFDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 1 for output.The LED driving board is powered by a voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.Currently, the lighting driver has a total of 1 functions.From the lighting driver, there is a maximum output of 10.5AV.A supply voltage of 3.3V leads to high efficiency.The maximum supply voltage is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 3V.