APX809-46SAG-7 Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 30μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to APX809, the base PMIC number. In total, there are 1 inputs on the power management that can be monitored.
APX809-46SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX809-46SAG-7 Applications
There are a lot of Diodes Incorporated APX809-46SAG-7 Voltage Supervisors applications.
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Personal computers
- Electronics installed in the vehicle
- FPGA design
- Automotive power systems
- External alarm
- Kitchen appliances
- Data storage applications
- Power distribution systems of infant care room
