Welcome to Hotenda.com Online Store!

logo
userjoin
Home

APX803-29SAG-7

APX803-29SAG-7

APX803-29SAG-7

Diodes Incorporated

3 Terminals 3-Pin APX803 Voltage supervisor1 Channels Min 1.1V Max 5.5V

SOT-23

APX803-29SAG-7 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Number of Pins 3
Weight 7.994566mg
Operating Temperature-40°C~85°C TA
PackagingCut Tape (CT)
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part StatusDiscontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation400mW
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch0.96mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number APX803
Output Open Drain or Open Collector
Pin Count3
Number of Channels 1
Max Supply Voltage5.5V
Min Supply Voltage1.1V
Operating Supply Current 20μA
Power Dissipation400mW
Adjustable Threshold NO
Watchdog TimerNo
Reset Active Low
Number of Voltages Monitored1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 2.89V
Max Reset Threshold Voltage 2.96V
Threshold Voltage +2.93V
Overvoltage Threshold2.93V
Number of Monitored Inputs 4
Reset Delay Time 200 ms
Height 1mm
Length 3mm
Width 1.4mm
REACH SVHC No SVHC
RoHS StatusROHS3 Compliant
In-Stock:78434 items

Pricing & Ordering

QuantityUnit PriceExt. Price

APX803-29SAG-7 Product Details

APX803-29SAG-7 Overview


It is mounted through 3 terminals on the power management. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 3 pins in it. 3 pins make up the power management. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 20μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to APX803, which is the base power ics number. On the power management, 4 inputs are monitored.

APX803-29SAG-7 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current

APX803-29SAG-7 Applications


There are a lot of Diodes Incorporated APX803-29SAG-7 Voltage Supervisors applications.

  • Low voltage/high power - AI, GPU
  • Telecommunications equipment
  • Consumer electronics
  • Sensitive sensors
  • Transformer load monitoring equipment
  • Insulation fault location system
  • Microcontroller system
  • Medical-specific isolation transformer
  • Electronics installed in the vehicle
  • Electric heating appliances

Get Subscriber

Enter Your Email Address, Get the Latest News