AP2171DSG-13 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.This switch is of type USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Status Flag.It is a member of the AP2171 family.A total of 8 terminations have been recorded.The 8 pins are used for the operation of the system.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, there are 1 channels available.
AP2171DSG-13 Features
Supplied from 5V
1 channels
AP2171DSG-13 Applications
There are a lot of Diodes Incorporated AP2171DSG-13 Power Switches ICs applications.
- USB Protection
- Storage (HDDs, SSDs)
- Handheld Devices
- Solid State Drivers
- Hot Swap
- Solid-State Drives
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Portable GPS
- Hard Disk Drives
