AP2145SG-13 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.USB Switch is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.A total of 8 terminations have been found in it.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 160Ohm ohms.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires Vsup above 2.7V.A 3/5V power supply is used by the part.
AP2145SG-13 Features
Supplied from 3.3V
Resistance of 160Ohm
AP2145SG-13 Applications
There are a lot of Diodes Incorporated AP2145SG-13 Power Switches ICs applications.
- Portable Devices
- PC Cards
- Hot Swap
- USB Ports/Hubs
- Wearable Devices
- Portable GPS
- Storage Drives
- Wireless Headsets
- Storage (HDDs, SSDs)
- Hard Disk Drives
