AP1703GWG-7 Overview
This power management consists of 3 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. By Surface Mount, IC management has been mounted. A total of 3 pins are located on this power management. There are 59 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 30μA. To find similar IC managements from the manufacturer, you can always search by AP1703. At most, voltage supervisor can operate at a supply temperature of 30μA. The power management monitors 1 inputs at once.
AP1703GWG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current
AP1703GWG-7 Applications
There are a lot of Diodes Incorporated AP1703GWG-7 Voltage Supervisors applications.
- Kitchen appliances
- Display equipment
- Power distribution systems of operating room
- Digitally controlled LDO regulators circuit
- Precision measurement
- Battery cars
- DVR
- Microcontroller system
- Electronics installed in the vehicle
- Radar
