AP1703EWL-7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Surface Mount mounts power management on the wall. A total of 3 pins are located on this power management. There are 59 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 30μA. To find similar IC managements from the manufacturer, you can always search by AP1703. Voltage supervisor can work with a supply temperature of 30μA at the most. It is possible to monitor 1 inputs at the same time on the power management as a whole.
AP1703EWL-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current
AP1703EWL-7 Applications
There are a lot of Diodes Incorporated AP1703EWL-7 Voltage Supervisors applications.
- Power distribution systems of ICU
- Dash board
- Functional modules
- DC stabilized power supply module
- WiFi router
- Set top box
- Medical-specific insulation monitor
- Network equipment
- Automotive permanent magnet synchronous motors
- Important electronics for automotive protection
