AP1703AWG-7 Overview
As you can see, this power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The power management is mounted by Surface Mount. There are a total of 3 pins on power management. 59 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 30μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using AP1703, the base power ics number. The power management can work with a maximum supply temperature of 30μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
AP1703AWG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current
AP1703AWG-7 Applications
There are a lot of Diodes Incorporated AP1703AWG-7 Voltage Supervisors applications.
- Magnetic resonance imaging
- Radar
- Functional modules
- Unattended substation automation
- Electric heating appliances
- Medical-specific insulation monitor
- Solar power charger
- Insulation fault location system
- Battery cars
- Power distribution systems of infant care room
