AP1701AWG-7 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Using Surface Mount, IC management is mounted. A total of 3 pins are located on this power management. 59 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 30μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to AP1701, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 30μA. There are 1 inputs monitored at once on the power management.
AP1701AWG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current
AP1701AWG-7 Applications
There are a lot of Diodes Incorporated AP1701AWG-7 Voltage Supervisors applications.
- Automotive power systems
- Battery-powered equipment
- Leakage protection
- Battery cars
- Medical-specific insulation monitor
- FPGA design
- Network equipment
- Rechargeable batteries
- Detection of phase sequence
- Solar power charger
