DC-ME4-01T-S Overview
The module or board type of the microcontroller is MPU Core.An integral MCU electronics of it is a processor with ARM7TDMI, NS7520 cores that drives the whole thing.The default setting of the microcontroller is -40°C~85°C.The size of the flash on the MCU electronics is 4MB.There are two types of connectors. The first is RJ45.The MCUs is part of the Digi Connect ME? Series of products.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 8MB.In this MCU chip, the speed is set to 55MHz.55MHz frequency is sufficient for MCU chip to continue functioning accurately.Microprocessor chip is currently operating at 85°C°C, which is the maximum operational temperature.As long as microprocessor is warmer than -40°C when operating, microprocessor is safe to keep microprocessor operating.The architecture that micro controller's core adopts is ARM.A 3.3V-volt supply is needed to power this microcontrollers.Microcontroller has been decided to store data using value FLASH, NOR, SDRAM.Bulk-size packaging is available.This MCUs has a 270mA supply current.
DC-ME4-01T-S Features
Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Speed of 55MHz
Core architecture of ARM
Bulk packaging
DC-ME4-01T-S Applications
There are a lot of Digi DC-ME4-01T-S Microcontroller, Microprocessor, FPGA Modules applications.
- Embedded Instrumentation
- Closed Loop Motor Control
- Test and Measurement
- Healthcare Monitoring
- Human Machine Interface
- Human Machine Control Panel
- Software Defined Radio
- Network Enabled Data Acquisition
- Embedded Control Processing
- Medical Devices
