DC-ME-01T-C-10 Overview
The microcontroller has been classified as a MPU Core type module or board.An integral MCU electronics of it is a processor with ARM7TDMI, NS7520 cores that drives the whole thing.It is important to note that the microcontroller is set to -40°C~85°C as the default setting.A MCU electronics's flash size is measured by the letter 2MB.Connectors of type RJ45 are the most common.A member of the Digi Connect ME® Series, this MCUs can be found in this category.A RAM size of 8MB is set in order to ensure that the software runs normally and that MCU chip does not crash.There is a 55MHz speed for this MCU chip.In order for microprocessor to continue to function accurately, microprocessor must continue to operate exactly at 55MHz frequency as long as microprocessor remains accurate.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.At the time of this microprocessor, the maximum operating temperature is 85°C.As far as the temperature is concerned, microprocessor should be warmer than -40°C when microprocessor is operating.Program ARM relies on a proprietary architecture called ARM.There is a 3.3V volt supply that powers this microcontrollers, which is used as its operating voltage.In this case, the value chosen for data storage is FLASH, NOR, SDRAM.It is important to note that the MCUs supply current is set to 270mA.
DC-ME-01T-C-10 Features
Core processor of ARM7TDMI, NS7520
Flash size of 2MB
Speed of 55MHz
Core architecture of ARM
DC-ME-01T-C-10 Applications
There are a lot of Digi
DC-ME-01T-C-10 Microcontroller, Microprocessor, FPGA Modules applications.
- Process Monitoring
- Healthcare Monitoring
- Patient Monitoring
- IoT Secure Gateways
- Human Machine Interface
- Human Machine Control Panel
- Home and Building Automation
- Thermostat
- Industrial Gateways
- Embedded Instrumentation
