CC-9C-V212 Overview
The microcontroller has been classified as a MPU Core type module or board.Microprocessor chip is powered by a processor with a total of ARM926EJ-S, NS9360 cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.MCU chips flash size is 4MB.There are two types of connectors. The first is SO-DIMM-144.There are two versions of this microcontrollers in the ConnectCore? 9C Series.A RAM size of 16MB is set in order to ensure that the software runs normally and that MCU chip does not crash.The MCU chip operates in 155MHz speed.MCU chip can continue to function accurately at 155MHz frequency.This package comes with Module.As of right now, 85°C is the maximum operational temperature at this time.The temperature should be warmer than -40°C while microprocessor is operating.The architecture that micro controller's core adopts is ARM.There is a 3.3V volt supply that powers this microcontrollers, which is used as its operating voltage.Microcontroller has been decided to store data using value SDRAM.This microchips is embedded with a memory of 256MB which can be used to store data and programs in the future.
CC-9C-V212 Features
Core processor of ARM926EJ-S, NS9360
Flash size of 4MB
Speed of 155MHz
Core architecture of ARM
CC-9C-V212 Applications
There are a lot of Digi CC-9C-V212 Microcontroller, Microprocessor, FPGA Modules applications.
- Embedded Control Processing
- Patient Monitoring
- Industrial Control
- Thermostat
- Test and Measurement
- Embedded User Interfaces
- Weighing Scales
- Data Acquisition
- IoT Secure Gateways
- Industrial Instrumentation
