20-101-1154 Overview
Module or board type MPU Core describes the microcontroller.Microprocessor chip is driven by a processor with Rabbit 4000 cores.It is important to note that the microcontroller is set to -40°C~85°C as the default setting.This MCU electronics has a size of 512KB in terms of its flash.IDC Header 2x25, 2x5 is the connector type.I would say that MCU chip belongs to the RabbitCore RCM4100 Series.To ensure that the software runs normally, the RAM size is reduced to 1MB.In 58.98MHz speed, the MCU chip operates.At a frequency of 58.98MHz, MCU chip can continue to function accurately.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.As of right now, 85°C is the maximum operational temperature at this time.When operating, microprocessor should be warmer than -40°C.An operating voltage of 3.6V volts is required to run this microcontrollers.Data storage is set to FLASH, SRAM.The maximum output current of the microchips is 125mA, and microcontroller operates at a voltage of T.A memory of 512kB is embedded in the microchips, and this memory can be used to store data and programs.
20-101-1154 Features
Core processor of Rabbit 4000
Flash size of 512KB
Speed of 58.98MHz
20-101-1154 Applications
There are a lot of Digi 20-101-1154 Microcontroller, Microprocessor, FPGA Modules applications.
- Test and Measurement
- Industrial Automation
- Network Enabled Data Acquisition
- Power Protection Systems
- Healthcare Monitoring
- Embedded Instrumentation
- Thermostat
- Embedded Control Processing
- Home and Building Automation
- Industrial Instrumentation
