20-101-1028 Overview
In this case, the module or board type of the microcontroller is MPU Core.With Rabbit 3000 cores, the processor drives microprocessor chip.-40°C~70°C is the default setting for the microcontroller.The size of the flash on the MCU electronics is 512KB Internal 1MB External.Microprocessor chip is a type IDC Header 2x20 connector.The MCUs is part of the RabbitCore RCM3750 Series of products.A RAM size of 512KB is set in order to ensure that the software runs normally and that MCU chip does not crash.22.1MHz speed is the speed of the MCU chip.22.1MHz frequency is sufficient for MCU chip to continue functioning accurately.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.At this time, 70°C is the maximum operational temperature.As long as microprocessor is warmer than -40°C when operating, microprocessor is safe to keep microprocessor operating.A 5V volt supply powers this microcontrollers.Microcontroller operates with a maximum output current of 68mA.
20-101-1028 Features
Core processor of Rabbit 3000
Flash size of 512KB Internal 1MB External
Speed of 22.1MHz
20-101-1028 Applications
There are a lot of Digi 20-101-1028 Microcontroller, Microprocessor, FPGA Modules applications.
- Bar Code Scanners
- IoT Secure Gateways
- Test and Measurement
- Home and Building Automation
- Human Machine Control Panel
- Patient Monitoring
- Embedded Instrumentation
- Industrial Automation
- Network Enabled Data Acquisition
- Portable Data Terminals
