S29JL064J55TFI003 Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. Case Tape & Reel (TR) is available. It is available in 48-TFSOP (0.724, 18.40mm Width) case. There is 64Mb 8M x 8 4M x 16 of memory on the chip. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. There is a voltage range of 2.7V~3.6V for the supply voltage. It is recommended that the mounting type be Surface Mount. The chip contains 48 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. The memory device designed for this application has been designed to be powered by an 3V power supply. It is encased in an 48-pin package that contains this ic memory chip. There is a note indicating that this memory chip operates at an 3V volt supply voltage. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 16mA for its nominal supply current when it comes to the memory component. This chip features all the merits of a conventional chip, but it also features TOP BOOT BLOCK, BOTTOM BOOT BLOCK to improve system performance. As a member of the JL-J series memory devices, this part plays an important role for its target applications. The programming voltage required for certain nonvolatile memory arrays is 3V. There are a total of 16126 specific sized divisions in this memory.
S29JL064J55TFI003 Features
Package / Case: 48-TFSOP (0.724, 18.40mm Width)
48 Pins
Operating Supply Voltage:3V
Additional Feature:TOP BOOT BLOCK, BOTTOM BOOT BLOCK
S29JL064J55TFI003 Applications
There are a lot of Cypress Semiconductor Corp S29JL064J55TFI003 Memory applications.
- personal computers
- multimedia computers
- mainframes
- data buffer
- networking
- hard disk drive (HDD)
- telecommunications
- cell phones
- nonvolatile BIOS memory
- graphics card
