S29GL128P11TFIV20 Overview
There is a memory type Non-Volatile for this type of device. There is a Tray case available. The case is embedded in 56-TFSOP (0.724, 18.40mm Width). Memory size on the chip is 128Mb 16M x 8. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The supply voltage can be up to 1.65V~3.6V. It is recommended that the mounting type be Surface Mount. There are 56 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. A voltage of 3V is required for the operation of this memory device. A package of 56 pins is used to protect this memory device. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. As far as its nominal supply current is concerned, this memory component carries a rating of 110mA. There is only a single power supply required for this memory chip. This part, which belongs to the GL-P series of memory devices, plays an important role in its target applications. It is necessary to apply 3V programming voltage to certain nonvolatile memory arrays in order to change their state. A total of 128 specific sizes of divisions are present in this memory.
S29GL128P11TFIV20 Features
Package / Case: 56-TFSOP (0.724, 18.40mm Width)
56 Pins
S29GL128P11TFIV20 Applications
There are a lot of Cypress Semiconductor Corp S29GL128P11TFIV20 Memory applications.
- nonvolatile BIOS memory
- telecommunications
- cell phones
- embedded logic
- supercomputers
- workstations,
- hard disk drive (HDD)
- networking
- printers
- data buffer
