S25FL132K0XMFI013 Overview
A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Cut Tape (CT) case as well. As you can see, it is embedded in 8-SOIC (0.209, 5.30mm Width) case. On the chip, there is an 32Mb 4M x 8 memory, which is the size of the chip's memory. There is a mainstream memory format used by this device, which is called FLASH-format memory. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 2.7V~3.6V. It is recommended that the mounting type be Surface Mount. A total of 8 terminations have been planted on the chip. In total, 1 functions are supported by this part. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. It is important to note that the memory has a clock frequency rotation within the range of 108MHz. The ic memory chip comes in a package with 8 pins that allows it to be connected to a computer. According to the datasheet, this memory chip operates at an operating voltage of 3V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. Despite all the merits of this chip, it also has ALSO CONFIGURABLE AS 32M X 1 to boost system performance. This part is part of the FL1-K series of memory devices, which play a key role in its target applications. By integrating with the SPI-type serial bus, this memory transmits data to the processor. In order for it to operate properly, memory ics requires a maximum supply current of 0.025mA . 3V programming voltage is required to change the state of certain nonvolatile memory arrays.
S25FL132K0XMFI013 Features
Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins
Operating Supply Voltage:3V
Additional Feature:ALSO CONFIGURABLE AS 32M X 1
S25FL132K0XMFI013 Applications
There are a lot of Cypress Semiconductor Corp S25FL132K0XMFI013 Memory applications.
- supercomputers
- networks
- cell phones
- servers
- graphics card
- eSRAM
- Camcorders
- mainframes
- networking
- embedded logic
