CY7C1019D-10VXIT Overview
There is a memory type Volatile for this type of device. It is supplied votage within Tape & Reel (TR). As you can see, it is embedded in 32-BSOJ (0.400, 10.16mm Width) case. A memory chip with a capacity of 1Mb 128K x 8 is used on this device. There is a SRAM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 4.5V~5.5V. As far as the mounting type is concerned, Surface Mount is recommended. The chip has 32 terminations. In total, 1 functions are supported by this part. Memory devices such as this one are designed to be powered by 5V and should be used as such. In order to select similar parts, typical manufacturers refer to CY7C1019 as the device's base part number. It is encased in an 32-pin package that contains this ic memory chip. There is a note indicating that this memory chip operates at an 5V volt supply voltage. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. This memory chip is rated 80mA for its nominal supply current. This memory chip has 1 ports for accessing one memory address via read or write. There is only a single power supply required for this memory chip. There are COMMON-bit addresses mapped into the memory for I/O ports on this device. It is recommended that this memory run at a maximum frequency of 100MHz.
CY7C1019D-10VXIT Features
Package / Case: 32-BSOJ (0.400, 10.16mm Width)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
CY7C1019D-10VXIT Applications
There are a lot of Cypress Semiconductor Corp CY7C1019D-10VXIT Memory applications.
- networks
- hard disk drive (HDD)
- nonvolatile BIOS memory
- Camcorders
- Cache memory
- multimedia computers
- personal digital assistants
- embedded logic
- DVD disk buffer
- main computer memory
