CY7C1019D-10VXI Overview
There is a memory type Volatile for this type of device. In addition, memory ics is available in a Tube case as well. As you can see, it is embedded in 32-BSOJ (0.400, 10.16mm Width) case. Memory size on the chip is 1Mb 128K x 8. SRAM-format memory is used in this device, which is a mainstream design. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. A voltage of 4.5V~5.5V is possible to be applied to the supply. There is a recommendation that Surface Mount mounting type should be used for this product. On the chip, there are 32 terminations. In total, this part supports 1 functions. An 5V supply is required for this ic memory chip to operate properly. CY7C1019, as the device's base part number, is frequently referred in order to select similar parts. The memory device is enclosed in a package with an 32-pin connector. I have noticed that the memory device has 32 pins, which indicates that it has 32 locations in the memory. A voltage of 5V is noted as the operating supply voltage for this memory. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. It is rated for a nominal supply current of 80mA for this memory component. 1 ports allow read/write access to one memory address in this chip. The power supply needed for this memory chip is only 5V . There are COMMON-bit addresses mapped into the memory for I/O ports on this device. In this ic memory chip, the frequency can be clocked at up to 100MHz times per second.
CY7C1019D-10VXI Features
Package / Case: 32-BSOJ (0.400, 10.16mm Width)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
CY7C1019D-10VXI Applications
There are a lot of Cypress Semiconductor Corp CY7C1019D-10VXI Memory applications.
- Camcorders
- supercomputers
- DVD disk buffer
- telecommunications
- graphics card
- personal digital assistants
- cell phones
- networking
- hard disk drive (HDD)
- eDRAM
