CY2CP1504ZXIT Overview
The clock divider is packaged in a 20-TSSOP (0.173, 4.40mm Width) case. It is packaged as a Tape & Reel (TR). Normal operation has a maximum value of 250MHz. It contains 20 terminations. High efficiency is feasible with a supply voltage of 2.5V. A mount of Surface Mount has been applied to it. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. To ensure reliable performance, the temperature should be set to -40°C~85°C. The clock switch should operate with a voltage of 2.375V~3.465VV. On this board, there is a pin count of 20. There is a value of LVPECL as the output. In order for the timeing clock to operate, it is connected to the 20 pins. A cut smart buffer of this type is contained in Clock Drivers. There is an electronic gadget called 2DL in this family. This value is set to 2.625V for the maximum available supply voltage (Vsup). It is important to keep the supply voltage (Vsup) above 2.375V in order to ensure normal operation. It is set to output 4 by default. Power is provided by a 2.5/3.3V volt source.
CY2CP1504ZXIT Features
20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
CY2CP1504ZXIT Applications
There are a lot of Cypress Semiconductor Corp CY2CP1504ZXIT Clock Buffers & Drivers applications.
- Edge computing
- Global positioning system (GPS)
- Measurement test
- Patient diagnosis
- Mass storage system
- High-performance workstation
- Smartphone
- High-end consumer electronics
- High speed industry
- Oscilloscope and logic analyzer front ends
