CY29942AI Overview
32-LQFP case is available for the cut smart buffer. It is available in the case Tube. In normal operation, the maximum value is set to 200MHz. 32 terminations have been recorded. With a voltage of 2.5V, high efficiency is possible. In this case, it is set up as Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution), Multiplexer. Temperature -40°C~85°C is recommended for reliable performance. It should be able to work with a power source of 2.375V~3.465VV. The clock buffer contains 32 pins. The output of it is LVCMOS, LVTTL. For operation, 32 pins are used. This is a member of the family of CY29942. The cut smart buffer you are looking for is contained within Clock Drivers. This is set to 2.625V for the maximum supply voltage. To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 2.375V. As a default, it is set to output 18 by default. There is a 2.5/3.3V volt supply attached to it. In addition, CAN ALSO OPERATE AT 3.3V SUPPLY can be obtained when using this gadget. There is no external influence on it, as it consumes 7mA quiescent current.
CY29942AI Features
32 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
CY29942AI Applications
There are a lot of Cypress Semiconductor Corp CY29942AI Clock Buffers & Drivers applications.
- Peak detection
- Line receiver and signal recovery
- Wireless infrastructure equipment
- Telecommunications
- Patient diagnosis
- High-performance workstation
- High reliability telecommunication system
- Data transmission
- Zero crossing detector
- Defense and aerospace equipment
