CY2309SXI-1T Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains a total of 16 terminations within RF synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 16-bit clock PLL designed specifically for microprocessors. CY2309 is the base part number for finding related electronic parts. The clock PLL has 16 pins that are available. Electronic frequency generator can handle voltages up to 3.3V. Clock Drivers-type frequency generators are usually classified as this type. 9 signal outputs are provided for enhancing output frequency as much as possible. The maximal same edge skew (tskwd) can not be exceeded.
CY2309SXI-1T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXI-1T Applications
There are a lot of Cypress Semiconductor Corp CY2309SXI-1T Clock Generators applications.
- Automatic control system test
- Line cards used in telephone exchange
- CPUs
- Signal modulation and demodulation
- 1 Gigabit Ethernet
- Electronic equipment
- Communication infrastructure
- Simple clock clean-up circuits
- Coherent carrier tracking
- Multi-function printers
