PALCE20V8-10JC Overview
The item is enclosed in a PLCC package.The device is programmed with 8 I/O ports.It is programmed to terminate devices at 28.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of the family Programmable Logic Devices.With 28 pins programmed, the chip is ready to use.When using this device, 8 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK is also available.If high efficiency is desired, the supply voltage should be kept at 5V.In this case, it is mounted by Surface Mount.The pins are 28.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of 4.75V, it operates.A power supply of 5V volts is required to operate this device.This frequency is 62.5MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 75°C.The status of input signals is determined by 12 dedicated inputs.If the maximal frequency is less than 62.5MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as FLASH PLD.It is configured with an output of 8.It is associated with 64 product terms.
PALCE20V8-10JC Features
PLCC package
8 I/Os
28 pin count
28 pins
5V power supplies
8 outputs
PALCE20V8-10JC Applications
There are a lot of Cypress Semiconductor
PALCE20V8-10JC CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
