CY7C374-100AC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 64 I/Os.Devices are programmed with terminations of 100.This electrical part has a terminal position of QUAD, which serves as an important point of access for passengers and freight.The power supply voltage is 5V.100 pins are programmed on the chip.Data is stored using FLASH.Surface Mount is used to mount this electronic component.A total of 100 pins are provided on this board.There is 5V power supply available for it.5.25V is the maximum supply voltage (Vsup).In its simplest form, it consists of 8 logic blocks (LABs).Input signals are detected using 2 dedicated inputs.In order to operate properly, the supply voltage (Vsup) should be greater than 4.75V.It should not exceed 76.9MHz in terms of clockfrequency.It is recommended that the operating temperature remain below 70°C.
CY7C374-100AC Features
TQFP package
64 I/Os
100 pin count
100 pins
5V power supplies
8 logic blocks (LABs)
CY7C374-100AC Applications
There are a lot of Cypress Semiconductor
CY7C374-100AC CPLDs applications.
- Timing control
- Interface bridging
- I/O expansion
- Discrete logic functions
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
