CY7B992-5JXIT Overview
PLCC case is available for the cut smart buffer. In case Tape and Reel, the cut smart buffer is available. Normal operation has a maximum value of 80MHz. A total of 32 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. On this board, there is a pin count of 32. In order for the timeing clock to operate, it is connected to the 32 pins. There is a circuit clock contained within Clock Drivers that is responsible for this function. It is designed to operate at a minimum temperature of -40°C in order to maintain reliability. In order to ensure stable operation, the maximum operating temperature must be set to 85°C. The electronic gadget belongs to the 7B family. An IC with a value of PLL BASED CLOCK DRIVER is used in order to achieve this. By default, the output of the circuit clock is set to 8. There is a 5V volt supply that powers the timeing clock. It is capable of handling a maximum supply voltage of 5.5V volts. As low as possible is the source voltage 4.5V, which can be used by the system to work. It is recommended that the supply voltage be kept at 5V for maximum efficiency.
CY7B992-5JXIT Features
32 terminations
Clock Drivers subcategory
logic IC type of PLL BASED CLOCK DRIVER
CY7B992-5JXIT Applications
There are a lot of Cypress Semiconductor
CY7B992-5JXIT Clock Buffers & Drivers applications.
- Clock signal level shifting
- High performance communication system
- Data center
- Cloud computing
- Network
- High speed industry
- High-end consumer electronics
- Data communication
- Telecommunications
- Computing
