PA84A Overview
It is packaged in an TO-3-8-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 2 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 150V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500μV for input offset voltage. A supply current of 5.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -25°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. In order to conduct this part, you will need to provide dual supply voltages of 150V volts.
PA84A Features
2 Pins
supply voltage of 150V
120dB voltage gain
PA84A Applications
There are a lot of Cirrus Logic
PA84A Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
