TS80C188XL20 Overview
The microprocessor is convenient for international shipping since it is packaged in PQFP. The packaging method Bulk provides high reliability. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. To date, there have been 80 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 5V. An architecture based on 16 bits is used. 20MHz is the CPU's frequency. Datasheets for 80 pin functions can be found here. The embedded microprocessor is a typical Microprocessors. With a width of 8, this CPU has a wide external data bus. If the temperature is higher than 70°C, the microprocessor should not operate. A total of 80 pins are injected into the CPU microprocessor's body. This CPU is widely used in a variety of applications with its Surface Mount mounting. It is possible to use the micro processor from 5V. According to the datasheet, the embedded microprocessor requires 5V power supply. Currently, the CPU core voltage is 5V. CPU voltages cannot exceed 90mA. A voltage greater than 5.5V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 4.5V. The embedded microprocessor also includes the following features: DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS. Hardware interrupts can be dealt with by terminating 5 external interrupts. In DMA (Direct Memory Access), 2 channels are applied.
TS80C188XL20 Features
16-Bit Structure
TS80C188XL20 Applications
There are a lot of Intel
TS80C188XL20 Microprocessor applications.
- Equipment control
- Instrument control
- Consumer electronics products
- Toys
- Robots
- Radio
- Television
- Heater/Fan
- Calculator
- Kindle
