TM266DVB2 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 28-SMD Module package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.This differential driver requires a 3.3V power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -55°C~125°C TA.This is a 28-pin driver IC with enhanced power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.A transceiver module's temperature less than 85°C must be used for operation.There must be no minimum operating temperature for this optical transceiver, which is -40°C.The transceiver's maximum supply voltage of this IC is rated at 5.25V.Using an antenna, there are 1 transmitters, which produce radio waves in order to transmit or send data.If the input current exceeds 95mA, this can transceiver could malfunction.This line driver ic requires a minimum supply voltage of 3.14V to function properly.In this case, the wide receiver uses the 28-DIP-GW supplier package.One of the Copperhead? series, representing an enhanced power-saving method, is this integrating circuit.
TM266DVB2 Features
28 pins
Copperhead? series
TM266DVB2 Applications
There are a lot of PulseR TM266DVB2 Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Aircraft positioning
- Thermal management
- Fiber distributed data interface (FDDI)
- Metro access rings
- Sensor reporting
- Optical sub-assembly (OSA)
- Switching system
- Routers
- Datacom networking applications
