TM266DSA1 Overview
With the enhanced 28-SMD Module package, this driver IC is excellent for driving common LEDs.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C TA.Wide receiver with enhanced power dissipation control, 28-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It is important that the operating transceiver module's temperature is below 85°C.It must not be less than -40°C degrees Celsius for this optical transceiver to operate properly.As far as the transceiver's maximum supply voltage of this IC is concerned, it is rated at 5.25V.1 transmitters are present, which are can transceivers that produce radio waves to transmit or send data with the help of antennas.In the event that the input current reaches or exceeds 95mA, the can transceiver may malfunction.For this line driver ic, a minimum supply voltage of 3.14V is required.In this case, the wide receiver uses the 28-DIP-GW supplier package.This line driver integrating circuit represents a power-saving technique that is part of the Copperhead? series.
TM266DSA1 Features
28 pins
Copperhead? series
TM266DSA1 Applications
There are a lot of PulseR TM266DSA1 Drivers/Receivers/Transceivers applications.
- Vehicle
- Tuner
- Wireless teaching
- Mainframes, workstations or storage devices
- AV receiver
- Datacom networking applications
- Fiber distributed data interface (FDDI)
- Home theater wiring-free
- Bar, KTV wireless entertainment
- Thermal management
