AS1747-BTDT Overview
As the electronic part is packed in 10-WFDFN Exposed Pad, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. On the other hand, analog switches can be constructed using SPDT switching circuits. This multiplexer is composed of 2 circuits. Internally, this switch multiplexer has a resistance of 850mOhm. For details about the functions of 10 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage.
AS1747-BTDT Features
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 31MHz
AS1747-BTDT Applications
There are a lot of ams AS1747-BTDT Analog Switches & Multiplexers ICs applications.
- FTTH
- T1/E1 Terminals
- Sample hold systems
- ATM
- ISDN NT1/TA
- Data switching
- Battery Powered Systems
- Modems
- Ultrasound
- Automatic test equipment
