ATF1508ASVL-20QC100 Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a PQFP package.The device is programmed with 80 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.With 100 pins programmed, the chip is ready to use.When using this device, YES is also available.3000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 100.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of 3V, it operates.Currently, there are 80 Programmable I/Os available.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.If the maximal frequency is less than 83.3MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.
ATF1508ASVL-20QC100 Features
PQFP package
80 I/Os
100 pin count
100 pins
ATF1508ASVL-20QC100 Applications
There are a lot of Atmel (Microchip Technology)
ATF1508ASVL-20QC100 CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
