ATF1504AS-15JI84 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 64 I/Os.Devices are programmed with terminations of 84.This electrical part has a terminal position of QUAD, which serves as an important point of access for passengers and freight.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.84 pins are programmed on the chip.As a building block for digital circuits, there are 1500 gates.A high level of efficiency can be achieved by maintaining the supply voltage at 5V.Data is stored using EEPROM.Surface Mount is used to mount this electronic component.A total of 84 pins are provided on this board.It operates at a maximum supply voltage of 5.5V volts.Initially, it requires a voltage of 4.5V as the minimum supply voltage.There should be a temperature above -40°C at the time of operation.Temperatures should not exceed 85°C.There should be a lower maximum frequency than 100MHz.A programmable logic type is categorized as EE PLD.
ATF1504AS-15JI84 Features
J package
64 I/Os
84 pin count
84 pins
ATF1504AS-15JI84 Applications
There are a lot of Atmel (Microchip Technology)
ATF1504AS-15JI84 CPLDs applications.
- Timing control
- Interface bridging
- I/O expansion
- Discrete logic functions
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
