PA94 Overview
Packaged in a 12-SIP, 8 Leads case, the buffer op amp is ready to use. Power-type instrumentation amplifiers are used in this application. A Bulk case is used for delivering the op amp. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electrical part should be mounted using type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -25°C~85°C . As long as the supply current of the chip does not exceed 17mA, this op amp ic can operate. It is recommended to keep the voltage gain at 115dB at all times. In total, there are 1 circuits on this buffer amplifier. In order for this buffer op amp to function, it should have a temperature of at least -25°C degrees Celsius. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. As a recommendation, this electronic component should be used with a power supply that can deliver 17mA. Apex Precision Power? is the number that corresponds to the series of the buffer op amp.
PA94 Features
115dB voltage gain
PA94 Applications
There are a lot of Apex Microtechnology PA94 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Proportional operation circuits
- Measurements of Wheatstone bridge
- Precision measurement
- Signal amplification
- Automation control systems
- Comparator
- Vehicle electronics
- Addition operation circuits
- High-frequency data acquisition systems
